Click To Call(656) 254-5516Click To Get A Free Estimate
Red clay brick paver walk in a herringbone pattern curving past a flower bed

Warm brick color that stays rich and clean

Brick Paver Sealing in Plant City, FL

Call (656) 254-5516 and a local contractor will price sealing for your Plant City brick pavers.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.25 to $2.50 a sq ft to clean, sand and seal
Call Now(656) 254-5516

Can someone seal my brick pavers in Plant City soon?

A local contractor seals brick pavers in Plant City, FL, and a reply comes within 1 business day, usually much sooner. The estimate is free, and you decide what happens next. To start, call (656) 254-5516.

Brick behaves differently from concrete, and the sealer has to match. Rusty's Pro Wash and Seal says brick absorbs sealer differently and usually needs products formulated for clay. Tell the contractor what your bricks are, and how old the walk, patio or drive is, and ask for a free estimate. Brick that has settled or lost sand is repaired before anything is rolled on, so describe those spots too.

Call (656) 254-5516

Brick pattern pavers with a rough brush stroke showing a clean strip against a darkened strip
Why choose us

Why does brick need a different sealer than concrete?

Brick is clay, and clay drinks sealer at its own pace. Unilock says concrete, brick and natural stone absorb sealer at different rates, so the product must suit the material. Rusty's Pro Wash and Seal says the same about clay, and says natural stone needs breathable products. An unsuitable coat can look blotchy or cloud. Ask the contractor to name the sealer for brick when you ask for a free estimate.

Color matters too. The brick maker Pine Hall says color can run through the body of the brick, and firing changes shade. That makes a small test spot worth the wait. To arrange one, call (656) 254-5516.

Are old brick walks and driveways in Plant City worth sealing?

Often, after repairs. A Plant City washing company says older downtown brick tends to settle and lose joint sand. Wikipedia lists three National Register historic districts in and around downtown, which suggests plenty of older streets and homes, though it does not say what paving they have. If your brick is decades old, expect resetting before sealing. For a look, ask for a free estimate.

What cleaning is safe for brick pavers?

Start light. Unilock says a stiff plastic brush is the way to begin on efflorescence, with wire brushes avoided because they leave rust marks. Acid-based removers may change color on some pavers, so a test spot comes first. Pressure that is too high scars brick faces and empties joints. To ask what method will be used, call (656) 254-5516.

Green growth, rust and tannin each get a different product. Rusty's Pro Wash and Seal says sealing over stains or algae traps them for good. Point out dark patches when you ask for a free estimate.

How do I handle white haze on my brick?

White haze is usually efflorescence. Unilock explains it as calcium salts brought to the surface by wetting and drying, and calls it harmless and temporary. Pavers must be clear of it before sealing, and waiting 2 to 3 months, or up to a year, lets it fade on its own. Haze can return where water keeps soaking in. Tell the contractor when you ask for a free estimate.

Does a sealer protect brick from Plant City weather?

Partly. Sealer slows water, dirt and sun fade at the surface, and Unilock says sealed pavers are easier to sweep and wash. It cannot stop what comes up from below, and it does nothing for a bad base. Wikipedia counts about 56 inches of rain a year here, in sandy and poorly drained soil, so a brick walk that holds water has a drainage cause no coat will cure. To ask whether yours does, call (656) 254-5516.

Summer heat matters as well. The July mean high near 94 degrees, per Wikipedia, bakes unprotected color. Whether the sealer carries UV protection is a fair question for any contractor, so ask for a free estimate and ask.

What should I ask a contractor before brick is sealed?

Ask four things. Which sealer goes on, and is it made for clay? Will a small spot be tested first? How are loose bricks and empty joints handled? What are the drying and keep-off times? The answers tell you whether the plan fits brick or was copied from a concrete job. Write them down, then ask for a free estimate.

Also ask about the sprinklers. Unilock says nearby sprinklers should be shut off while a coat cures, and irrigation spray is what leaves rust on pavers around Plant City. Bring it up when you call (656) 254-5516.

Pricing

What does brick paver sealing cost in Plant City?

No page read for this site gives a brick only rate. Rusty's Pro Wash and Seal publishes $1.25 to $2.50 per square foot in Tampa Bay for the full clean, sand and seal, and says brick usually needs clay products. The table below uses that range, so treat it as a starting point. For a real number on your brick, ask for a free estimate.

Joint repair, resetting loose bricks and stain treatment add cost. The same page says small jobs often meet a minimum of $500 to $1,000. For help comparing bids, call (656) 254-5516.

Paved areaTypical exampleWash, sand and seal
250 sq ftEntry walk$500 to $1,000
500 sq ftBrick patio$625 to $1,250
800 sq ftBrick driveway apron and walk$1,000 to $2,000
1,200 sq ftBrick drive and front court$1,500 to $3,000

Figures use the $1.25 to $2.50 per square foot that Rusty's Pro Wash and Seal publishes for Tampa Bay. The contractor sets the final price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

Get a Free Estimate

Contractor kneeling at a brick edging while a homeowner points to a stained corner
How it works

What is the brick sealing process from first look to finish?

Brick gets extra time in the early steps, and the sealer is last. To schedule, call (656) 254-5516.

1. Look closely

The contractor checks for empty joints, loose or rocking bricks, old coatings and the type of brick.

2. Clean for clay

Growth, rust and tannin are treated with products that suit brick, tested on a small spot.

3. Reset and fill

Shifted bricks are reset and joints packed with fresh sand, then everything dries.

4. Seal for brick

A sealer made for clay goes on in a thin, even coat.

5. Stay off

Rusty's Pro Wash and Seal says 24 hours on foot, and the label sets the rest.

How long does sealer last on brick pavers in Plant City?

Three to five years is the common answer from Rusty's Pro Wash and Seal and Unilock. Two Plant City company pages say two to five, with full sun, traffic and sprinkler spray shortening it. Unilock adds that checking compatibility between old and new sealer on a small spot comes before recoating. To have yours looked at, call (656) 254-5516.

Photos

What do sealed brick pavers look like around Plant City?

Freshly sealed paver driveway on a brick walk near Plant City
Sealed paver pool deck on a brick walk near Plant City
Sealed paver patio behind the home on a brick walk near Plant City
Sealed paver walkway to a front door on a brick walk near Plant City
Close view of freshly sealed pavers on a brick walk near Plant City
Paver area with one cleaned half beside a dirty half on a brick walk near Plant City
Contractor cleaning pavers on a brick walk near Plant City
Contractor sealing or sanding pavers on a brick walk near Plant City
Questions

Frequently asked questions about brick paver sealing

How much does it cost to have your pavers sealed?

Rusty's Pro Wash and Seal lists $1.25 to $2.50 per square foot in Tampa Bay for the clean, sand and seal. Brick may price differently, since the same page says it usually needs products formulated for clay. Ask for the sealer and wash on separate lines.

What is the average cost to seal pavers in Florida?

Most Tampa Bay projects run $1.25 to $2.50 per square foot, per Rusty's Pro Wash and Seal, with minimum charges of $500 to $1,000 on small jobs. No page read for this site gives a brick only rate.

Is there a downside to sealing pavers?

Unilock names a whitish film if moisture is trapped, slick high sheen finishes when wet, and the repeat cost every few years. For brick, the sealer also has to suit clay, which absorbs differently than concrete.

How should brick pavers be sealed?

In order: clean, fix empty joints and loose bricks, let everything dry, then apply a sealer made for brick. Rusty's Pro Wash and Seal says brick usually needs clay-formulated products, and Unilock says to test a small spot first.

How do you clean a brick patio?

Start by finding the cause of the dirt. Green growth, tannin and rust each need a different product, and Unilock warns that acid removers can change the color of some pavers. A contractor tests on a small spot first.

Do I need to clean my pavers before sealing them?

Yes. Rusty's Pro Wash and Seal warns that sealing over stains or algae can trap them permanently, and a Plant City company says clay and dust are removed before sealing, not sealed over.

Is it okay to pressure wash brick pavers?

With care. Too much force blasts the sand from the joints and can scar the face. Unilock suggests a fan nozzle at about 30 degrees from roughly 12 inches away, and fresh sand goes back in afterward.

How often should I seal pavers in Florida?

Rusty's Pro Wash and Seal and Unilock both say three to five years. A Plant City company says two to three, and another says two to five.

Will sealing change the color of my brick pavers?

A wet look sealer deepens color, and a natural finish stays close to the unsealed look, per Unilock. The brick maker Pine Hall says some brick is colored all the way through, which is why the test spot matters.

Why does white haze appear on my brick pavers?

Efflorescence, a calcium salt that Unilock says forms on concrete, brick and stone. It is harmless and temporary, though it can return where water keeps getting in, and sealing should wait until it clears.

Can old brick with empty joints be sealed?

After repair. A Plant City washing company says older downtown brick often has settling and empty joints, and that shifted brick is reset and the joints packed full before any sealing.

Ready to bring your brick back?

Call or send a short request, and a contractor writes back within 1 business day, often sooner.

Call (656) 254-5516

Free, no obligation