Click To Call(656) 254-5516Click To Get A Free Estimate
Faded herringbone pavers with a peeling gloss coat and moss in the joints beside a Plant City garage door

Hazy, peeling or chalky pavers given a fresh start

Paver Restoration and Resealing in Plant City, FL

Call (656) 254-5516 and a local contractor will price restoring and resealing your Plant City pavers.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.25 to $2.50 a sq ft to clean, sand and seal
Call Now(656) 254-5516
Restoration

How fast can Plant City pavers be restored and resealed?

A local contractor restores and reseals pavers in Plant City, FL, and you will hear back within 1 business day, usually much sooner. The estimate is free, and you can say no after seeing the number. To begin, call (656) 254-5516.

Restoration is for pavers that a plain reseal will not fix: a coat gone white or patchy, color faded to chalk, joints empty and stains baked in. The job strips what failed, cleans down to bare paver, refills the joints and starts the coat over. Picture a drive that looks even again from the street. Describe what yours looks like when you ask for a free estimate.

Call (656) 254-5516

Does my Plant City driveway need restoration, a reseal or new pavers?

Rusty's Pro Wash and Seal sorts jobs into three tiers by cost, and the first rule it gives is that routine care almost always costs less than corrective work. Which tier fits a Plant City driveway depends on what the surface looks like today. For a quick opinion, call (656) 254-5516.

Reseal

Coat is thin but whole, joints are mostly full. Rusty's puts routine cleaning and sealing at $1,000 to $3,000.

Restore

Coat has failed, hazed or peeled, or stains and sand loss pile up. Rusty's puts major restoration at $3,000 to $8,000 and up.

Replace

Pavers are cracked or the base has failed. Rusty's puts removal and replacement at $5,000 to $15,000 and up.

Chemical stripper beading on a gray paver patio with half the surface rinsed clean in a Plant City yard
Service area

Which places near Plant City get paver restoration?

A contractor who serves Plant City also drives to the places below, from the Polk County line to the bay. Every place on the list gets a page of its own. If your street is missing, call (656) 254-5516.

Why choose us

Why does old paver sealer turn cloudy or peel in Plant City?

A Southwest Florida contractor guide says a solvent sealer traps moisture in humid weather and leaves a milky, hazy finish, and that washing alone will not fix it. Plant City averages about 56 inches of rain a year, with June and July the wettest months at over 8 inches each. A coat put on damp pavers has nowhere for that moisture to go. To ask what went on yours, call (656) 254-5516.

White patches can also be efflorescence, a calcium salt deposit that Unilock calls harmless and temporary but that returns where water keeps seeping in. It is not the same as a failed coat, and the fix differs. A contractor can tell the two apart at a glance, so ask for a free estimate.

Why choose us

Why does the old coat on Plant City pavers have to be stripped first?

Fresh sealer will not bond to a failing coat, and the guide notes that stripping adds a lot of labor. It also says stripping a failed solvent sealer can easily double the project cost. Rusty's Pro Wash and Seal warns that sealing over stains or algae permanently traps them. Skipping the strip saves money on day one and costs more by the next season in Plant City. To see what a strip would involve at your Plant City home, ask for a free estimate.

How it works

What is the paver restoration process in Plant City, in order?

Five stages, each done once and in order. Rushing one makes the next fail. To schedule, call (656) 254-5516.

1. Inspect and test

On a Plant City drive, the contractor marks sunken, cracked and loose pavers and tests the old coat to learn what it is.

2. Strip the failed coat

A stripper made for the old sealer goes onto the Plant City pavers, is left to work and is rinsed off.

3. Clean and treat stains

Algae, rust and oil on Plant City pavers each get a product made for them, since sealing over them traps them.

4. Fix and re-sand

Low spots in the Plant City pavers are leveled, and fresh joint sand goes in once they are dry.

5. Reseal and cure

A coat goes on the dry Plant City surface, then the area stays clear for the time the label gives.

What if my Plant City pavers have sunk or tilted?

Sealer cannot fix a base that has moved. Wikipedia describes the Southern Flatwoods soil under this area as sandy and poorly drained, and sandy, wet ground lets a base settle. Pavers that rock under a tire or hold a puddle need lifting and resetting first. Ask whether leveling is in the price or listed separately when you ask for a free estimate.

Do the older Plant City neighborhoods change the plan?

Plant City has three historic districts on the National Register: Downtown Plant City Commercial, Downtown Plant City Historic Residential and North Plant City Residential. Older homes may have pavers laid decades ago with an unknown coat on top, and the strip step depends on knowing what it is. If your home has an association, check its rules on finish and color before the job, then call (656) 254-5516.

How long does a restored and resealed paver surface last in Plant City?

Expect the usual 3 to 5 years between coats from Rusty's Pro Wash and Seal, with a sunny drive nearer 3. Water-based sealers are the type the Southwest Florida guide prefers for humid weather. A Rusty's Pro Wash and Seal service page advises a first seal within 1 to 2 years of installation, which means a coat that never went on is the most common reason restoration is needed. To plan the next cycle, ask for a free estimate.

Pricing

What does paver restoration cost in Plant City?

No Plant City page lists a restoration rate. The Southwest Florida guide puts a restoration tier of stripping, cleaning, sand and reseal at $3.50 to $5.00 and up per square foot, against $1.25 to $2.50 per square foot for Rusty's Pro Wash and Seal's standard Tampa Bay clean, sand and seal. The table sets them side by side. Ask for the strip on its own line, and ask for a free estimate.

A smaller job may sit on the $500 to $1,000 minimum Rusty's Pro Wash and Seal mentions, so the math does not always hold. If a bid for restoration reads like a plain reseal price, find out whether stripping is in it. For help reading a bid, call (656) 254-5516.

Paved areaStandard clean, sand and sealRestoration with stripping
600 sq ft$750 to $1,500$2,100 to $3,000 and up
1,000 sq ft$1,250 to $2,500$3,500 to $5,000 and up
1,500 sq ft$1,875 to $3,750$5,250 to $7,500 and up

Standard column: the $1.25 to $2.50 per square foot Rusty's Pro Wash and Seal publishes for Tampa Bay. Restoration column: the $3.50 to $5.00 and up tier from a Southwest Florida contractor guide, used as a rough yardstick because no page read for Plant City gives a stripping rate. Repairs and leveling are extra.

Get a Free Estimate

How do rain and sandy soil affect restored pavers in Plant City?

A stripped and washed surface has to dry through before any coat goes on, and in a Plant City summer that can mean waiting out a rainy week. The Southern Flatwoods soil Wikipedia describes under this area is sandy and poorly drained, so water that gathers at the edge of a drive keeps the base damp for days. Ask how many dry days the strip, the wash and the coat each need, and give your preferred Plant City dates when you ask for a free estimate.

Wet summers are the norm across Plant City, so a careful Plant City contractor keeps a spare day in the schedule. Ask each Plant City bidder how a rained-out day is handled and whether the price in Plant City changes if a step has to be repeated.

What should I ask a Plant City contractor before restoration starts?

A good bid names the stripper and the sealer, lists leveling and joint sand on their own lines and says what happens if the old coat turns out to be different from what was expected. Rusty's Pro Wash and Seal sorts work into reseal, restore and replace tiers, so ask which tier your pavers fall into and why. Written answers let you compare two Plant City bids on equal terms, and a Plant City homeowner who has them in hand can say yes to one bid without second thoughts. For help reading either one, call (656) 254-5516.

Which Plant City surfaces can be restored?

Restoration is not only for driveways. A Plant City contractor can strip and reseal any paved surface that sealer was put on, and the strip step works the same way on each. Tell the contractor which of these you have when you ask for a free estimate.

Plant City driveways

Tire marks, oil drips and sun fade show first here, and a failed coat on a Plant City drive is easy to spot from the street.

Plant City pool decks

A deck that stays wet shows white haze and algae sooner, so a Plant City pool deck often needs the strip before anything else.

Plant City walkways and entries

Front walks collect mulch, soil and planter runoff, and a worn coat on a Plant City walk lets the stains soak in.

Plant City patios and lanais

Patios take sun, rain and furniture feet, and an older Plant City patio may carry a coat nobody remembers putting down.

Two contractors with rollers and a pump sprayer finishing a restored brick red paver drive in Plant City

Ready to bring your Plant City pavers back?

Call or send the short form. A contractor replies within 1 business day, often well before.

Call (656) 254-5516

Free, no obligation

Photos

What do restored pavers look like around Plant City?

Freshly sealed paver driveway on a restored Plant City driveway
Sealed paver pool deck on a restored Plant City driveway
Sealed paver patio behind the home on a restored Plant City driveway
Sealed paver walkway to a front door on a restored Plant City driveway
Close view of freshly sealed pavers on a restored Plant City driveway
Paver area with one cleaned half beside a dirty half on a restored Plant City driveway
Contractor cleaning pavers on a restored Plant City driveway
Contractor sealing or sanding pavers on a restored Plant City driveway
Questions

Frequently Asked Questions

How often do you need to reseal pavers in Florida?

Rusty's Pro Wash and Seal and most Florida companies say every three to five years, nearer three on a sunny Plant City driveway. If the last coat is now peeling or cloudy, the pavers need restoration, not just another coat.

Is there a downside to sealing pavers in Plant City?

The repeat cost is the main one. A coat on pavers that were not cleaned well also traps what is underneath, and a solvent sealer can turn milky in humid weather. Choosing the product and the prep with care avoids most trouble in Plant City.

Can I power wash my Plant City patio pavers?

Yes, with control. Too much pressure throws sand out of the joints and can scar the surface. A power wash will not clear a failed, hazy coat, which a Southwest Florida contractor guide says needs stripping.

How do I make my Plant City pavers look new again?

That depends on the damage. A wash and new sand may be enough, a reseal handles fading, and a failed old coat needs stripping first. A contractor can tell which applies after seeing the surface.

Why did my paver sealer turn white or cloudy?

Moisture trapped under a solvent sealer in humid weather is the usual cause, according to a Southwest Florida contractor guide, and washing alone will not fix it. Plant City averages about 56 inches of rain a year, so humidity is a fact of life here.

Does stripping old paver sealer double the cost in Plant City?

That same guide says stripping a failed solvent coat can easily double a project. Rusty's Pro Wash and Seal lists major restoration at $3,000 to $8,000 and up, against $1,000 to $3,000 for routine cleaning and sealing.

Can sunken Plant City pavers be restored without replacing them?

Often. Sunken or tilted pavers can usually be lifted, the base fixed and the same pavers set back, though replacement is the choice if they are broken. Rusty's Pro Wash and Seal lists removal and replacement as the costliest tier. For a look, call (656) 254-5516.

How soon can Plant City pavers be restored?

The estimate is free, and a local contractor writes back inside a business day, often within hours. The Plant City work date then depends on the dry weather the strip, wash and seal each need.

Does my Plant City driveway need restoration or just a reseal?

A reseal fits a coat that is thin but whole, with joints mostly full. Restoration fits a coat that has peeled, hazed or turned chalky, or a surface with stains and sand loss. A Plant City contractor can tell which applies after a look and a small test spot.

Can I put new sealer over old sealer that is peeling?

Fresh sealer will not bond to a failing coat, according to a Southwest Florida contractor guide, so the loose coat has to come off first. Sealing over it also traps whatever sits underneath. A Plant City contractor can test the old coat before choosing a stripper.

How long do restored pavers stay off limits in Plant City?

Rusty's Pro Wash and Seal gives about 24 hours before foot traffic and 48 to 72 before cars on a freshly sealed surface, and the label on the product used sets the cure time. Plan the Plant City week so the cars have another place to park.

Will restoring my Plant City pavers include new joint sand?

Yes, fresh joint sand goes in once the pavers are dry, after any low spots are leveled. The strip and wash can empty the joints, so sand is part of the job. Ask for the sand to appear as its own line in the Plant City bid.

Time to restore your Plant City pavers?

A short request brings a written answer within a business day, often hours, and the estimate is free.

Call (656) 254-5516

Free, no obligation