Click To Call(656) 254-5516Click To Get A Free Estimate
Two women talking on a brick pattern paver driveway, a brick home and a green lawn behind them

Richer color and joints that stay full

Paver Sealing in Plant City, FL

Call (656) 254-5516 and a local contractor will price sealing for your Plant City driveway, pool deck or walkway.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.25 to $2.50 a sq ft to clean, sand and seal
Call Now(656) 254-5516

How soon can I get paver sealing in Plant City?

A local contractor handles paver sealing in Plant City, FL, and you will hear back within 1 business day, usually much sooner. The estimate is free, and booking is your call. To begin, call (656) 254-5516.

Sealing deepens the color of your pavers, helps hold the joint sand in place and makes dirt and algae easier to rinse off. Picture the walkway to your front door after a wet summer, dull and thin on sand, now dark and even with every joint full. A driveway carries tires and oil and a pool deck carries splash and bare feet, so each area needs its own plan. Say how each area is used by the household when you ask for a free estimate.

Call (656) 254-5516

Two contractors on a paver driveway, one rolling and one spraying, in front of two houses

What does a paver sealing job include?

A sealing job has four parts: an inspection, a deep wash, fresh joint sand and the coat of sealer. The wash takes the longest. For the steps as they apply at your address, call (656) 254-5516.

Inspection

The contractor notes the size, sunken spots, cracked pavers, old sealer and any place water collects before naming a price.

Deep wash

Algae, oil and rust come off with a product made for each, then a controlled wash rinses the surface.

Joint sand

Sand fills each gap so the pavers lock together and weeds have less room to start.

Sealer coat

Sealer goes on a fully dry surface in a thin, even coat, following the coverage on the label.

How do I know my pavers need sealing?

Look for faded color, joints sitting below the edges, sand spread across the drive after a storm and water that soaks in instead of beading. A Plant City washing company says Florida sun and humidity shorten sealer life. Refilling joints while the gaps are shallow costs far less than relaying pavers that have shifted. For a quick opinion, call (656) 254-5516.

Which sealer works in Plant City humidity?

Products differ, and none fits every house. Have the contractor name the sealer and give a reason for it. A Plant City company describes penetrating sealers, which soak in and leave a natural look, and topical sealers, which stay on the surface in a low gloss or wet look finish. A slip-resistant additive is also offered. To compare options for your pavers, call (656) 254-5516.

Rusty's Pro Wash and Seal calls the wet look the finish most often requested in Tampa Bay, with natural and high gloss as the other two. Brick needs products made for clay, and stone such as travertine needs breathable ones. Ask which product goes on which surface when you ask for a free estimate.

Wet look or natural: which finish is right for my home?

A wet look gives rich color with some shine, and a natural finish stays close to how the pavers looked when new. High gloss shows the most drama and also the most wear, so the quality of the application matters most there. Near water, grip underfoot usually counts for more than gloss. To see samples of each, ask for a free estimate.

How long does paver sealer last in Plant City?

Expect about three to five years, the span Rusty's Pro Wash and Seal and Family Handyman both give. A driveway in full sun sits nearer three, and a covered patio can go five or more. A Plant City washing company quotes as little as one to three years, so a pool deck that stays wet may want attention sooner. To have your coat checked, call (656) 254-5516.

Will extra coats of sealer protect my pavers longer?

No. Family Handyman writes that sealing more often adds no protection, and extra layers can leave a cloudy film. One thin, even coat at the label rate is the plan. If a bid pitches three or four coats as added protection, ask why before you ask for a free estimate.

What is the right time to seal pavers in Plant City?

Pick dry weather. A Plant City company says pavers should dry 24 to 48 hours before sealing, and Rusty's Pro Wash and Seal says the surface must be fully dry. Summer storms in this part of Hillsborough County can push a date back a day or two. To set a day around the forecast, call (656) 254-5516.

New pavers have to wait. Unilock says efflorescence, the white calcium haze, should clear first, which takes 2 to 3 months and can run to a year. Rusty's Pro Wash and Seal advises a first seal within 1 to 2 years of installation. If the pavers are new, tell the contractor the install month when you ask for a free estimate.

Can sealing fix pavers that have sunk or shifted?

No. Sealer will not correct a weak base or poor drainage. Pavers that rock under a tire or sit in a puddle need base work first, and sandy ground can let a base settle. Find out if leveling is included or billed on its own when you ask for a free estimate.

Surfaces

Which areas around a Plant City home can be sealed?

A coat goes well on drives, pool decks, patios and the walk to the front door. Wear differs from one to the next, so each gets its own plan. To start where the problem is worst, ask for a free estimate.

Driveways

A driveway takes tires, oil and the longest hours of sun. Sealing it evens out the color and keeps the joints full where the wheels roll.

Pool decks and lanais

Splash, bare feet and constant moisture wear a pool deck in their own way. Sealing a deck should leave it with grip when wet.

Patios and fire pit areas

A shaded patio stays damp, so green growth starts early there. Sealing a patio begins with those mossy corners.

Walkways and front steps

Mulch, loose soil and planter runoff settle on a front walk first. Sealing it is a small job, but it is the first thing a guest steps on.

Common problems

What paver problems are common around Plant City?

Five problems come up again and again here: sand loss after rain, algae in shade and around pools, sun fade, stains from oak leaves and hard water, and white haze on newer pavers. Each is cheaper to handle early. To learn which ones affect yours, call (656) 254-5516.

1. Sand washed out by summer rain

Plant City gets about 56 inches of rain in an average year, and Rusty's Pro Wash and Seal says summer rain erodes joint sand. When the joints run low, pavers shift and weeds root in, so sand goes back before any coat.

2. Green growth in shade and around pools

Humidity feeds mold, mildew and algae, and Rusty's Pro Wash and Seal singles out pool decks and shaded areas. A slick patch near a pool is a safety problem, not only a looks problem.

3. Color loss from year-round sun

Strong sun fades unsealed pavers across Tampa Bay, and a driveway with no shade goes first. Sealing restores depth and slows the fading that follows.

4. Stains from oak leaves and hard water

Rusty's Pro Wash and Seal lists oak tannin and hard water from sprinklers among the usual stains here. They need a treatment first, because sealer locks a stain in.

5. White haze on newer pavers

Unilock explains that efflorescence is a calcium salt deposit that is harmless and temporary, and that pavers should wait 2 to 3 months, or up to a year, before sealing. Saltwater pools can speed it up.

Pricing

What does paver sealing cost in Plant City?

Expect about $1.25 to $2.50 per square foot in Plant City for the clean, sand and seal together, the Tampa Bay range Rusty's Pro Wash and Seal publishes. Price follows square footage, then condition, repairs, access and the sealer chosen. Failed old sealer has to be stripped first, and that adds cost. For a number written for your home, ask for a free estimate.

Small jobs cost more per foot, and Rusty's Pro Wash and Seal says minimum charges of $500 to $1,000 often set the price on them. A 2,000 square foot driveway and pool deck would run about $2,500 to $5,000 at this range. If a quote comes in far lower, find out which steps are missing. Already have a bid? Call (656) 254-5516 and go over it together.

Only want a wash? Read about paver cleaning and joint sand, see which areas are covered or go to the home page to begin.

Paved areaTypical exampleClean, sand and seal
300 sq ftSmall patio or walkway$375 to $750
600 sq ftTwo car driveway$750 to $1,500
1,000 sq ftLarge driveway or pool deck$1,250 to $2,500
1,500 sq ftDriveway plus pool deck$1,875 to $3,750

Math based on the $1.25 to $2.50 per square foot that Tampa Bay paver companies publish. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

Get a Free Estimate

Screened pool with gray paver decking and a lake view beyond the screen
Why choose us

Why hire a contractor who works near Plant City?

A contractor who works in eastern Hillsborough County already plans for summer storms, shade and sandy ground. The price comes in writing, and the decision to hire stays with you. To begin, call (656) 254-5516.

Contractors who know this ground

A contractor who covers eastern Hillsborough County already works in this sun, this rain and this sandy soil. Your first visit starts from experience, not guesses.

A quote that costs nothing

Looking at your pavers and writing the price costs you nothing. If the number does not fit, say no and the matter ends there.

Real numbers to hold a bid against

Tampa Bay paver companies publish their rates per square foot, and this site passes the range along. If a bid lands well outside it, ask why.

You set the pace

Take your time with the price. See the contractor standards page for what to confirm before signing.

Ready for a free paver sealing estimate in Plant City?

Call or use the short form, and an answer comes within 1 business day, often well before.

Call (656) 254-5516

Free, no obligation

Gloved hand and stiff brush working across brick pattern pavers, one clean strip next to a mossy one
Photos

How do Plant City pavers look after a fresh seal?

Freshly sealed paver driveway at a Plant City area home
Sealed paver pool deck at a Plant City area home
Sealed paver patio behind the home at a Plant City area home
Sealed paver walkway to a front door at a Plant City area home
Close view of freshly sealed pavers at a Plant City area home
Paver area with one cleaned half beside a dirty half at a Plant City area home
Contractor cleaning pavers at a Plant City area home
Contractor sealing or sanding pavers at a Plant City area home
How it works

What is the paver sealing process from start to finish?

Nearly every job runs through five steps, from the first measurement to a walk-through at the end. If you are ready to schedule, call (656) 254-5516.

1. Measure and inspect

To price the sealing job, the contractor measures the area and marks sunken spots, cracked pavers, old sealer and places where water stands.

2. Cover and wash

Plants and screens get covered and the sprinkler timer is paused. A surface cleaner and a mold and algae treatment go over the pavers, kept at a pressure that leaves the sand in the joints.

3. Treat the stains

Oil, rust and tannin each get a product made for that stain, tried on a small spot first. Family Handyman warns against muriatic acid, which can damage pavers.

4. Refill the joints

Once the pavers are dry, sand goes back in. Where polymeric sand is already there, Family Handyman says to match it with polymeric sand and mist it to set.

5. Seal and walk the job

If sealer is part of the order, it goes on a dry surface with a pump sprayer and a roller to even it. Rusty's Pro Wash and Seal puts foot traffic at about 24 hours and cars at 48 to 72, and the contractor confirms the times for the product used.

Questions

Frequently Asked Questions

How often should I seal pavers in Florida?

Most companies say every three to five years. Rusty's Pro Wash and Seal puts a sunny driveway near three years and a covered patio at five or more, while a Plant City washing company quotes one to three years in Florida sun. Water that sinks in rather than beading up means the coat has worn down.

What should I clean pavers with before sealing?

A contractor uses a cleaner made for what is on the surface, such as a mold and algae treatment for green growth and a separate product for oil or rust. Family Handyman warns against muriatic acid, which can damage pavers. The surface must then dry fully before any sealer goes on.

Will Dawn dish soap clean pavers?

It handles light surface dirt, and Family Handyman suggests it only for light stains. It does not lift algae roots, oil or rust, and sealing over what it leaves behind traps the problem. Ask a contractor which product the job needs.

Can I power wash my patio pavers?

Yes, but the pressure has to stay controlled. Too much force blasts sand out of the joints and can scar the surface, so fresh sand goes in after the wash. Ask the contractor what pressure and tool they use.

What is the average cost to seal pavers in Florida?

Rusty's Pro Wash and Seal lists $1.25 to $2.50 per square foot in Tampa Bay for the full clean, sand and seal. Small jobs may hit a $500 to $1,000 minimum, and repairs or stripping old sealer cost extra.

Is there a downside to sealing pavers?

The main one is the repeat cost, since the coat wears and needs redoing. Scuffs show up faster on a wet look finish than on a matte one. Sealer cannot repair sunken pavers either, so those get fixed first.

Is it better to spray or roll paver sealer?

Either can work, and many contractors use both, spraying to cover and rolling to even out the coat. The result depends more on a dry surface and a thin, even coat than on the tool. Ask the contractor how they plan to apply it.

How long should I stay off pavers after sealing in Plant City?

Rusty's Pro Wash and Seal says foot traffic can return after about 24 hours and vehicles after 48 to 72. The label on the product used sets the exact times, so follow what the contractor tells you.

Does the rainy season change when pavers get sealed in Plant City?

Yes. Plant City averages about 56 inches of rain a year, and sealer needs a dry surface. A summer storm can move the date a day or two, so ask the contractor how a rain delay is handled.

Time to protect your Plant City pavers?

Send a short request or call, and a contractor writes back inside 1 business day, often within hours.

Call (656) 254-5516

Free, no obligation